Alışveriş sepetinizde ürün bulunmamaktadır.
Kategoriler
- KİMYASALLAR / CHEMICALS
-
MERCK KİMYASALLARI / MERCK CHEMICALS
- Solventler / Solvents
- Tuzlar / Salts
- Asitler / Acids
- Organik Sentez Ürünleri / Organic Synthesis Products
- Standartlar / Standards
- Thin-Layer Chromatography (TLC) Products
- Volumetrik solüsyonlar / Volumetric solutions (Titripur®, Titripac®, Titrisol®, Titriplex®)
- Karl Fischer Reagents
- Test Kitleri ve Fotometrik Metotlar / Test Kits and Photometric Methods
- İndikatörler / Indicators
- Biyofarmasötik Üretim / Biopharmaceutical Manufacturing
- Biyokimyasallar / Biochemicals
- Metaller / Metals
- API Synthesis
- Numune Hazırlama / Analytical Sample Preparation
- TEKNİK KİMYASALLAR / TECHNICAL GRADE
-
CAM MALZEMELER / GLASSWARE
- Arsenik Tayin Cihazı
- Ayırma Hunisi - Separatory Funnel
- Balon / Boiling Flask
- Balon Joje / Volumetric Flask
- Beher / Beaker
- Büret / Burette
- Çalkalama Mezürü / Mixing Cylinder
- Damlatma Hunisi / Dropping Funnel
- Desikatör / Desiccator
- Erlen / Erlenmeyer Flask
- Erlen Şilifli / Erlenmeyer w/ground glass neck
- Gooch Krozesi / Gooch Crucibles
- Huni / Glass Funnels
- Lam - Microscope Slides
- Mezür / Measuring Cylinder
- Nuçe Erleni / Filtering Flask
- Otomatik Büret / Autoburette
- Piknometre / Pycnometer
- Pipet / Pipettes
- Saat Camı
- Soğutucu / Condenser
- Şişe
- Tüp / Test Tubes
- Baget
- PLASTİK MALZEMELER / PLASTICWARE AND CONSUMABLES
- METAL MALZEMELER
- PORSELEN MALZEMELER
- DİĞER SARF MALZEMELER
- LABORATUVAR GÜVENLİK MALZEMELERİ
-
LABORATUVAR CİHAZLARI / LABORATORY EQUIPMENT
- Dijital Büret / Digital Burette
- Dispenser
- Etüv
- Fotometre / Photometer
- Hassas Terazi / Analytical Balances
- İletkenlik Ölçer / Conductivity Meter
- Karıştırıcı / Mixer
- Mantolu Isıtıcı / Heating Mantle
- Manyetik Karıştırıcı / Magnetic Stirrer
- Mekanik Karıştırıcı / Mechanical Stirrer
- Mikroskop / Microscopy
- Oksijen Metre / Oxygen Meter
- Otomatik Pipet / Micropipette
- Ph Metre / Ph Meter
- Refraktometre / Refractometer
- Saf Su Cihazı / Water Distiller
- Santrifüj / Centrifuge
- Su Banyosu / Water Baths
- Ultrasonik Banyo / Ultrasonic Baths
- Vakum Pompası
- ISOLAB CİHAZLARI / ISOLAB EQUIPMENT
- WINLAB ÜRÜNLERİ / WINLAB PRODUCTS
- ISOLAB SARF MALZEMELERİ / ISOLAB CONSUMABLES
- TFA ÜRÜNLERİ / TFA PRODUCTS
- TERMOMETRE / BOMEMETRE / DANSİMETRE / ALKOLOMETRE
Ohaus | ST 20 Cep Tipi pH Metre
0.01 pH hassasiyetinde su geçirmez cep tipi pH metre
First Usage
Condition the pH electrodes by immersing it in pH electrode protection solution for 1 hour before using. If the pH electrode protection cap is dry (may cause white crystals), add
storage solution in the cap and soak the pH electrode for 1 hour.
Accuracy
ST20 is 0.01pH resolution and 0.05pH accuracy pen meter. Each ST20 pen meter is factory calibrated.
You may need to calibrate the ST20 regularly to ensure accuracy.
pH Measurement
Remove the protection cap, rinse the pH electrode glass bulb with pure water (distilled water), and wipe clean. (Glass bulb is fragile, be careful, do not scratch it.)
• Press button-On/Off turn on the meter.
• Dip the electrode about 2 to 3cm into the test solution(at least 20ml). Stir and wait until the reading stabilized.
• Clean the electrode with pure water after measurement.
• When measurement, you can press button-Hold to freeze the reading, press button-Hold again to release measurement again.
• Press and hold button-On/Off to turn off the meter.
Calibration
• Press the button-ON/OFF to switch the pen on, dip the electrode into pH 7.0 buffer.
• Press the button-CAL to enter into calibration mode, The “CAL 7.00 pH” will be shown, “CAL” is blinking.
the meter will judge if the signal is stable automatically, it will take a few seconds, then the meter display
“CAL 4.01 pH”.
• When display “CAL 4.01 pH”, “CAL” is blinking, means pH7.00 calibration has been finished, Rinse the
electrode with pure water and dip it into pH 4.01 buer.
• The meter will judge if the signal is stable automatically; it will take a few seconds, then the meter display
“CAL 10.00 pH”. If the number, such as “4.01” is blinking, means the calibration point can not pass. You
may need to check if the buer is right.
• When display “CAL 10.00 pH” , means pH4.01 calibration has been finished, Rinse the electrode with pure water and dip it into pH 10.00 buffer.
• The “CAL” will disappear after finishing 3-point calibration and go back measurement mode.
Maintenance
Clean the electrode after test and cover the protection cap, be sure storage solution is not dry in the cap.
Harsh samples may short the pen meter life time, such as sticky, dirty or oily liquids.
The meter use button battery 1.5V (AA)*4 , replace all the batteries when the display fade or not turn on.
The electrode is replaceable.
Kuveyt Türk Kredi Kartları
Taksit
Taksit Tutarı
Toplam Tutar
1
6,244.31 TL
6,244.31 TL
Cihaz Özellikleri | |
Model | Cep Tipi |
Bu ürünle ilgili yorum yapın